Bostitch N62FNB Specifiche Scaricare il pdf (Pagina 5)

Tool Model Fastener Type Fastener SKU Gauge Length

FN1520 15 1-1/4” (32mm)

FN1524 15 1-1/2” (38mm)

FN1528 15 1-3/4” (45mm)

FN1532 15 2” (50mm)

FN1536 15 2-1/4” (57mm)

FN1540 15 2-1/2” (63mm)

TOOL SPECIFICATIONS

All demensions in inches unless otherwise specified.

-5-

Operating Pressure:

70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm

). Select the operating pressure within in this range for best fastener

performance.

DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.

Air Consumption:

The N62FNB requires 3.9 cubic feet per minute or C.F.M. (110.4 liters per minute or LT/MIN) of free air at 80PSI

(5.6 kg/cm

) to operate at a rate of 100 fasteners per minute. To determine the appropriately sized air

compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to the

compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm

For example, if your fastener usage averages 30 fasteners per minute, you need 30% of the tools C.F.M.

required to operate the tool at the rate of 100 fasteners per minute. In this case, be sure that your air

compressor can deliver a minimum of 1.17 C.F.M. (33.1 LT/MIN) at 80 PSI (5.6 kg/cm

) for optimum

performance.

FASTENER SPECIFICATIONS

* Stainless steel fasteners also available 1-1/4”, 2”, and 2-1/2” . Visit www.BOSTITCH.com for further details.

NOTE:

BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve

maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting

standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with

fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH

fasteners and accessories.

N62FNB

escription FN15ga Angled Finish Nailer

Engine Type Oil-Free

Operation Pressure Range 70-120 PSI (4.9 to 8.43kg/cm

)

Maximum Operation Pressure 120 PSI (8.43 kg/cm

)

astener Type FN15 Series

astener Gauge 15 Gauge

Fastener Range 1-1/4” – 2-1/2” (31mm – 63mm)

agazine Capacity 129

Length 14-3/16” (360.3mm)

Width 3-5/8” (92mm)

Height 11-11/16” (2 96.8mm)

Weight 4.15 lbs. (1.8kg, Including fitting)

N62FNB

Angled Finish Nails

1 2 3 4 5 6 7 8 9 10 ... 49 50

Commenti su questo manuale

Nessun commento

Bostitch N62FNB Specifiche Pagina 5

Commenti su questo manuale

Prodotti e manuali riguardandi Attrezzi elettronici Bostitch N62FNB